Abstract:
In order to investigate the cracks/fractures in the geothermal fields of Rotokawa and Ngatamariki, we measure seismic anisotropy across both fields and interpret the results in the context of stress aligned microcracks. Cracks aligned perpendicular to the direction of maximum horizontal stress close and their fluid is forced into cracks aligned with maximum horizontal stress (SHmax). Seismic anisotropy is the directional dependence of a seismic wave's velocity and provides a measure of crack orientation and density.
To measure seismic anisotropy we conduct shear wave splitting measurements on 52,000 station-earthquake pairs across both Rotokawa and Ngatamariki from earthquakes recorded during 2015. Both fields are the subject of other geophysical and geological studies. Thus they are excellent subjects for studying seismic anisotropy. We cluster our measurements by their station-event path and fit the parameters from these clusters to those from theoretical crack planes. We also apply 2-D tomography to shear wave splitting time delays (𝛿t) and spatial averaging to shear wave
splitting fast polarisations (∅). In addition, we compare time delays with P-wave to S-wave velocity ratios (νP / vS) .
Local measurements of stress within Rotokawa and regional measures of stress within the Taupo Volcanic Zone provide a comparison for the shear wave splitting measurements. We measure ∅ which agrees with the NE-SW regional direction of SHmax across Ngatamariki and parts of Rotokawa. Within Rotokawa, we observe a rotation of ∅ away from NE-SW toward N-S that agrees with borehole measurements of direction of SHmax of 023° and 030°. Spatial averaging of ∅ reveals mean orientations close to the strike of nearby active faults.
The theoretical crack planes, that fit best to the shear wave splitting measurements, correspond to aligned cracks striking 045° outside of both fields, 035° within Ngatamariki, and 035° through to 0° within Rotokawa.
The average percent anisotropy for the full dataset, approximately 4%, is close to the upper bound for an intact rock. Delay time tomography shows regions of higher delay time per kilometre of path length (s=km) within both fields and possibly associated with the production field fault in Rotokawa. vP =vS shows a wide range of normally distributed values, from 1.1 through to 2.4 with a mean of 1.6, indicating a mixture of gas filled and saturated cracks. A positive correlation between delay time per kilometre (𝛿tpkm) and νP /νS indicates that the majority of the cracks are saturated.
